Try an isolated filament transformer before any rejuvenation attempts. I have never seen a Sony tube hold up well after rejuvenation. It may look good long enough for the customer's check to clear the bank, but they seem to drop off to a worse level in a short period. Two or three wraps of 22AWG thru the FB/HVT iron core is a fast and reliable way to isolate the filaments. Scope the filaments first and get the p-p voltage, then do the isolation modification. Dominic DiLeo Atlantic TV Freeport, Maine )))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))) Hi This Sony TV model # KV-32S45 seems like has a loose connection inside gun.First I thought it is a loose connection on crt board so I resoldered all connections. The problem still there. By knocking to crt board, screen goes blue and tv shuts down. Sometimes screen stay blue for a few minutes. I never had case like this. Should I replace the picture tube or there is a way to fix it ? Nova Service Center 240-632-2994 Medi ***************************************************************************** CHECK OUT THE NEW CHATROOM! Just login and click on chat! http://www.tech-assist.org/secure/tip/main.htm The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/