You dont need to converge this seperatly for HD. As I had posted before---just converge the unit then go to ALCP hit mute enter and it will save the settings for 1080I TV Doctor Avalon, Wi ----- Original Message ----- From: "markbrock" <markbrock@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, January 10, 2005 8:15 AM Subject: [TechAssist] Re: SONY KP57HW40 > Im in the middle on this one, circuit city contract, has been serviced > before, the customer is military and moves around a lot, set just came to > town with him, he says he's been fighting with CC since he bought it in '02 > I assume the 1080i convergence needs set and saved but I don't want to mess > up whets working already if its the receiver causing the problem, I do > not have an HD signal gen. mine is analog but not a lot of demand around > here yet, can this convergence be done on board or do I need a hd generated > cross hatch ? I think I know the answer, and since my signal generator > does not put out 1080i signal I doubt I can be of much help, the max repair > is 225.00 so not sure it warrants the purchase of the generator, that will > only get used another time or so in a year. most around here are satisfied > if they get a pix at all, 720 is more than good enough. > brock > > Brock Electronics > R.R.4 box 237 > 5208 cr.3385 > Independence Ks. 67301 > 620-331-0235 > fax 331-7191 > > markbrock@xxxxxxxxxxxxx > Zenith*Philips*Peavey*Fender*Crate > we work on all brands,makes,models > of anything that plugs in the wall > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/