Hello, Can anyone help me provide solution, suggestions and TIPS as to how to repair this fault on a SHARP TV Model 14A2-S. The SET was brought in with BURNT Power Supply. I checked and fixed the SMPS (STRF 6653) including other components. Currently the power comes on when SWITCHED, but goes into STANDY MODE with the POWER LED indicating RED instead of GREEN. During this time the SET displays a NOTHING on the SCREEN. If I use the remote control to power, the LED changes from RED to GREEN, but stays on for a MAXIMUM of 10 seconds only, then back to RED, and then the remote cannot be used to power the SET again. After studying the DATASHEET of the VERTICAL DEFLECTOR IC, i.e. TDA 8357, it looks like the device has been triggered into protection mode, indicating a fualt on the main board. I took out the VERTICAL IC, and then powered the SET, this time it came ON indicating RED then suddendly to green, with the SCREEN displaying a white HORIZONTAL LINE. I want to suggest the VERTICAL device to be faulty, but can anyone HELP as to next what I should do. F.Y.I the VERTICAL IC is not available here. Thanks to ALL Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.