Convergence problem, (off a mile), Video OK, Convergence problem now...? I have replaced T-151 and finally the jungle I.C La76170 , now the picture tunes properly. The convergence is way off, looks like a static convergence problem? The magnets on the CRT have not moved wondering if there is internal digital convergence? The set may have been dropped I hope not? Could any one on the list shed some light on this problem? thank you for your time, Bruce. ----- Original Message ----- From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, January 09, 2004 3:39 PM Subject: [TechAssist] Re: SANYO AVM2568C Print (Video Problem)!! Sams #4298 > --------------------------------------------------------------- > Text pasted from WinSTIPS 2.0 > http://www.ServiceSoftware.com > --------------------------------------------------------------- > > SANYO AVM2567 > > Video Goes Into Oscillations After Set Warm > > Mcgregor Tv Service > > May Do This When Changing Channels > Fix Was T151 Part # 6450005206 > > --------------------------------------------------------------- > > Also see if the B+ supply resistor is open to the tuner. > > Bob Waterman, CET® #RI-28 > Master Technician License #9109 > Service Manager / Parts Manager > Gemini Computer, TV, & Security Alarms > (508)695-7302 > (508)695-7769 FAX > geminitv@xxxxxxxxxxxxxxxx > geminitv@xxxxxxx > www.geminicomputertvsecurityalarms.com > > > > ----- Original Message ----- > From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, January 09, 2004 2:33 PM > Subject: [TechAssist] SANYO AVM2568C Print (Video Problem)!! Sams #4298 > > > > Schematic or trouble shooting help needed! > > No Picture , looks like a AGC type problem. When the channel is changed > the > > picture will be off frequency then go black like video overload. If I > inject > > a signal at tuner and reduce the signal strength the picture will come in > > but will be snowy. If I increase the signal strength will loose the > picture > > again. > > Can any share a schematic of video section. I did change the tuner but > same > > condition. This set uses a LA76170 jungle I.C. > > Sams #4298 thought I would check the list before ordering print. > > thanks > > Bruce. > > > > B&T Electronics > > 139 Margaret St > > Sarnia Ontario > > Canada > > N7T 2Y3 > > 519 344 1850 > > > > > > -------------------------------------------------------------------------- > --- > > Jokes, complaints, off topics, general chat. Everything other than repair > > help problems can be found at this new list. No archives and posts will > not > > be found on Google or any other engine!To remove or join, email > > chat-request@xxxxxxxxxxxxxxx with remove or join as the subject. > > Send to the list at chat@xxxxxxxxxxxxxxx once subscribed. > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > -------------------------------------------------------------------------- --- > Jokes, complaints, off topics, general chat. Everything other than repair > help problems can be found at this new list. No archives and posts will not > be found on Google or any other engine!To remove or join, email > chat-request@xxxxxxxxxxxxxxx with remove or join as the subject. > Send to the list at chat@xxxxxxxxxxxxxxx once subscribed. > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/