#1 Bruno, Don't delete the previous response.Check q801 and Q803 Q803 C=5V E=5v B=4.3 Q801 E=Ground B=.8V C=.2V. What IC did you replace? al marquardt ampm@xxxxxxx ----- Original Message ----- From: <BCEMBALI@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, September 08, 2002 5:01 PM Subject: [TechAssist] Re: Re Goldstar tv NC95A > > TV only working when relay is close manual the 11 volt and 5 volt on the > regulator > are ok the IC Replaced also b+read 130 volt > > thank you > > Bruno > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/