[TechAssist] RCATX826 NO video N0 luminance...audio O.K.
- From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 13 May 2004 11:16:31 -0400
H.V OK, video information all the way to the CRT drivers. Screen voltages
OK. I have a block diagram for this chassis only. If I turn up the screen
control on the flyback still get no luminance on the CRT. The sound comes in
slowly, about 30 seconds after start up. I checked all resistors on the CRT
board OK .(posted for another chassis). I think this set if very similar to
the TX82 and TX825. Can any one upload a schematic on this one.
help appreciated,
Bruce.
B&T Electronics
139 Margaret St
Sarnia Ontario
Canada
N7T 2Y3
519 344 1850
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
