pins 1&2connect pins11& 12 connect pins 3 & 5 connect pins 4, 7, 8,9, 10, connect.If you have no startup try changing C4312 it's the horizontal vcc startup. check pin 57 of ICU1001 and see if you have 6.7V there.if not pin 6 U4101 for 8.9 v look for lectrolite around C4312. al marquardt ampm@xxxxxxx ----- Original Message ----- From: "roger birmingham" <rogerselectronics@xxxxxxxxx> To: <Techassist@xxxxxxxxxxxxx> Sent: Friday, October 11, 2002 10:11 AM Subject: [TechAssist] RCA-CTC149(Need pinout readings) > > Would like to know pinout readings on flyback transformer. > > (May have open transformer) > > (No schmatic on this chassis) > > Thanks, > > Rogers Electronics > > 1225 Birmingham Road > > Sulligent, Alabama 35586 > > 1-205-698-8047 > > > > --------------------------------- > Do you Yahoo!? > Faith Hill - Exclusive Performances, Videos, & more > faith.yahoo.com > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/