----- Original Message ----- From: junior hurdle To: techassist@xxxxxxxxxxxxx Sent: Friday, June 20, 2003 2:18 AM Subject: RCA vcr Model#VR634HF no video hi techs , I am working on this rca vcr model# vr634hf. it has on output signal . I replaced the tuner but that did not solve the problem. when I check the voltages on the tuner module I found that 5.1v is missing from pin 4. when I connect pin 3& 4 I get a signal but the video does not switch off. this missing 5.1v comes from pin 74 of ic601 the system control .there is no voltage at pin 74. Could ic 601 be faulty? Thanks Junior Hurdle ***************************************************************************** CHECK OUT THE NEW CHATROOM! Just login and click on chat! http://www.tech-assist.org/secure/tip/main.htm The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/