Hi all, I have a ctc195 chassis that is less than a year old that will shut off and won't start (not even a click) and will stay off from 5 minutes to 5hrs or so. this symptom can occur from 1 to two times a day to 1 time a week. Chipper shows error code "16" ,run or data lines clamped to logic "0".I do get Stnby voltages of 16 + 33 + 140+ -12 . Whats missing are the +5 and +12 from U14701.Pressing power, pin 19 of u13101 tries to go high but only reches 1.3v The outputs of U14701 at Stnby ~ 1v at power on may reach ~3v. I've changed U14701, U14101, Q14101, U3101, and the T4 chip. Also checked y13101 and its associated circuitry. Substituted Gemstar fom another like model and that checked out ok. Any suggestions would be greatly appreciated. Regards Jonas Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.