Which pins do I use to ring the flyback? I have the schematic but I can't find pin 14 on the flyback. Pins 2 and 3, and 1 and 3 rang good. Pins 1 and 2 rang bad. Kevin Wilks Kevin's TV & Video Repair Penticton BC Canada kevintv@xxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Jim Myers Sent: Monday, January 27, 2003 4:22 AM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: RCA model # F32683SB, CTC197CE2,dead, relay clicks. Bad flyback, pull it and ring test it to be sure. ----- Original Message ----- From: "Kevin" <kevintv@xxxxxxx> To: "TECH-ASSIST" <techassist@xxxxxxxxxxxxx> Sent: Monday, January 27, 2003 4:08 AM Subject: [TechAssist] RCA model # F32683SB, CTC197CE2,dead, relay clicks. Hi fellow techs, Working on this 32" RCA. When the pwr switch is pressed the just clicks-no HV or sound. Only brought in chassis-nojig either. Any ideas what could be wrong? I have never seen this chassis before so any help would be appreciated. TIA Kevin Wilks Kevin's TV & Video Repair Penticton BC Canada kevintv@xxxxxxx ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html