Check pin 9 of T14101, if loose or cold solder, resolder pin 9 and recheck Q14101 and associated circuitry. If pin 9 doesn't have a good connection it may damage Q14101 at turn on. Yvon Roy Atlantek TV Service 1295 Miramichi Ave Bathurst, NB E2A 1Y1 Tel: 506-545-7805 Fax: 506-546-2171 ----- Original Message ----- From: "Matt De Young" <gibbys_elec@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, January 13, 2003 2:30 PM Subject: [TechAssist] RCA f25442. Ticking sound when in standby. > This tv initially came in dead. Replaced HOT(q14401), Q14101, and soldered the coil in the horizontal. Now the set will just tick in shutdown. Replace c14106, and check other caps(test ok). The Sound is coming from the switch mode transformer. > > Thanx in advance.. > > Matt De Young @ Gibbys Electronics > St. Catharines, Ont Canada > gibbys_elec@xxxxxxxxxxx > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html