[TechAssist] RCA combo T19060GY, no filament...
- From: "Terry H." <tvdoc@xxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 3 May 2002 07:24:16 -0500
I know 'no filament' is oversimplifying. Unit has HV, sound and vertical.
Everything including video amps are operating like everything is fine, but no
raster. Had good video once for 10minutes or so, then went out. Tried to be
clever and floated the heater pins and did the wrap around the fly core.I had
1/4 screen but smeary at that. Changed the fly, but nothing. Checked continuity
from the fly out and it's good. Of course no prints so could use a pointer or
maybe a scan of the sweep circuit. Man I hate these. Any help appreciated.
Thanks.
Terry H.
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
