[TechAssist] Re: RCA VCR Mod VR323 NO response

  • From: "J Silverman" <greentron@xxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Fri, 3 Jun 2005 11:25:39 -0400

Thats a 1993 Panasonic. Main problem was plastic bump on chassis breaking
off so that the front loading mechanism would not stay aligned. Fix was
Chassis Piece Kit VVDS0017. Also had some where the pin was broken off of
the slider plate that engages the main cam gear. Recently had one with both
problems.
Jerry Silverman
Greentron Inc
4 Newland Ave
Greenville SC 29609
Fax/Phone 864 232 3889
mail to: greentron@xxxxxxx
----- Original Message -----
From: "Webster's TV" <webstertv@xxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, June 02, 2005 2:52 PM
Subject: [TechAssist] Re: RCA VCR Mod VR323 NO response


> Warren,
>
> Had a VR330 a few years ago that I have a tip written down for---Accepts
> tape,but no functions work, after several seconds tape ejects, also tuner
> video is distorted. Fix was to replace C102(330m-35v) in 20v supply in
power
> supply.
>
>                                                        HTH
>                                                        Dan Webster
>                                                        Webster's TV
>                                                        Shullsburg, Wi.
> ----- Original Message -----
> From: "Warren" <warrenca@xxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, June 01, 2005 9:34 PM
> Subject: [TechAssist] RCA VCR Mod VR323 NO response
>
>
> > Hi All.  I wondered if any of you had information on this vcr described
> > below
> >
> > Tape still stuck in the vcr.
> > No functions work including eject.
> > When you plug in the vcr to power the tape is drown out of the cassette
> > only.
> > If you plug it in again the tape will go back into the cassette.
> > ( the stuck tape is the valuable item here I think)
> > 5,15,-32 V at the output of powersupply when removed  ( if memory serves
> > me right)
> > Doesn't appear to be easy on this one, to get tape out!
> >
> > There are repair kits made for this vcr but I don't have a schematic or
> > a parts list included in this kit.
> > Global does not have any kits for this vcr.
> > Does any one have experience with this happening??
> >
> >
> > TIA
> > Warren Campbell
> > Campbell's TV & Appliances
> > Cannington Ont
> >
>
> --------------------------------------------------------------------------
> ---
> > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
> > Lost Password: http://www.tech-assist.org  and select "Login Problems?".
> > Appliance Repair List:
> http://www.tech-assist.org/secure/tip/chatjoin.htm#app
> > Email Archives: //www.freelists.org/archives/techassist/
> >
>
> --------------------------------------------------------------------------
---
> This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
> Lost Password: http://www.tech-assist.org  and select "Login Problems?".
> Appliance Repair List:
http://www.tech-assist.org/secure/tip/chatjoin.htm#app
> Email Archives: //www.freelists.org/archives/techassist/
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.322 / Virus Database: 267.4.1 - Release Date: 6/2/05
>
>



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.5.2 - Release Date: 6/3/05

-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Lost Password: http://www.tech-assist.org  and select "Login Problems?".
Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app
Email Archives: //www.freelists.org/archives/techassist/

Other related posts: