This set will loose channel memory when AC power has been removed. You will need to autoprogram it again. Bob Waterman, CET® #RI-28 Master Technician License #9109 Service Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxxxxxxx geminitv@xxxxxxx ----- Original Message ----- From: <AlHelmetag@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, October 31, 2002 11:13 AM Subject: [TechAssist] RCA Tuner Problems > RCA Model GMR821TR. Owner complained of Random Burst of Sound. The tuner > did have many ring cracked solder connections where the cables connect. But > after I reinstalled the tuner, the set would not change channels. It would > not advance from channel 2 to channel 3 for cable etc. It was late and I > decided to leave it alone and return to take a fresh look at the tuner again. > Has anyone had this problem before? > Also, the solder connections around the walls of this tuner looked pretty > good. Should they be resoldered anyway? > Thanks > Alex > Alhelmetag@xxxxxxx > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/