It may be in child protect mode. Using the original remote ( Or a universal programmed for RCA VCRs) , press AND HOLD the power button for about 10 seconds & see if she fires up. Jeff Stielau Shoreline Electronics Repair 125 Beechtree Lane Westbrook,CT 06498 860-399-1861 Voice 860-664-3535 Fax jstielau@xxxxxxxx ----- Original Message ----- From: "tom lee" <t8872695@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, October 26, 2001 9:43 AM Subject: [TechAssist] RCA TVCR combo T19060GY > > Hi friends. > I am working with TVCR combo RCA T19060GY. It will initialize when plug in > then > led power blink then no thing I mean the the relay for high power never > close. no sound no screen raster. low power for vcr and micro is ok . If I > push tape in it goes in. but no high power for tube.The unit has been in the > shop for 2 weeks . please help . TIA > Dang TVCR. > PS As I know when the tape is in power must turn on. In this case tape is in > and stay there. And I can not play.,rewind, even eject the tape out. > because no power > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.