Leaky zener diode or tact switches bad???? Dan W Wizard Electronics wizhd@xxxxxxxxxxxxxxxx ----- Original Message ----- From: "Alltv" <alltv@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, October 31, 2005 3:32 PM Subject: [TechAssist] Re: RCA TV model F36450 bad fly then no functions > Hi All > This set came in good hot but bad fly.. Replaced the fly and now it turns > on > but no menu of volume up or down. I thought the EPROM was bad and replaced > the EPROM then no change. when the set cold I can change the volume up or > down then when runs about 10 minutes then no functions.. > Any tips will be appreciated > Thanks in advance > > > -----Original Message----- > From: techassist-bounce@xxxxxxxxxxxxx > [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Phil Bader > Sent: Friday, January 21, 2005 9:05 AM > To: techassist@xxxxxxxxxxxxx > Subject: [TechAssist] Re: RCA TV model F36450 No pix or audio > > > I'm wondering if the eeprom was affected when the orig. parts failed. > Normally I would referr you to the schemo to see at what point the OSD > charactor generator injected the OSD into the video. The video loss > would be after that point. I assume theres no small set up switch on a > board that may have been repositioned. > Phil Bader > > CGRIFF4000@xxxxxxx wrote: > >>I have checked for all that. There is no OSD either and B+ seems all ok. >>Thank you, >>Chad >>Griffiths TV/VCR >>Schenectady, NY 12304 >> >>In a message dated 1/20/2005 3:15:25 PM Eastern Standard Time, >>tjanphyl@xxxxxxxxxxxxxxx writes: >> >> >> >>>think simple: >>>Could it be in Video mode? >>>Could you have unplugged a small cable when repairing it? >>>Swapped two cables in each others plug? >>>Damaged a small SMD around the parts you replaced, or slid the board >>>across a surface and scraped an SMD off? >>>Does OSD show? >>>Phil Bader >>> >>>CGRIFF4000@xxxxxxx wrote: >>> >>> >>> >>>>RCA 36" TV m# F36450 C# ATC113CA1. When this unit came to me, the SMPS > was >>>>chirping. I replaced the HOT &FTB and now the unit turns on fine and no >>>>chirping. But it does'nt have audio or video, it only turns on. Any > ideas? >>>>Thank you, >>>>Chad >>>>Griffiths TV/VCR >>>>Schenectady, NY 12303 >>>> >>>> >>>> >>>> >> >> >> >> >>--------------------------------------------------------------------------- > -- >>Lost Password: >>http://www.tech-assist.org and select "Login Problems?". >>Email Archives: >>//www.freelists.org/archives/techassist/ >> >> >> >> > > -- > > Philip Bader > Jan Phyl TV Inc. (estab. 1976) > 3420 Recker Hwy. Winter Haven, Fl. 33880 > Fax (863) 299-8821 > email: tjanphyl@xxxxxxxxxxxxxxx > > > > -- > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/2005 > > > ---------------------------------------------------------------------------- > - > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search > engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/