Max, Please use RCA chassis # when asking for tips on RCA's as this is the way most manuals etc. are listed with RCA's. Without knowing the chassis # here's a couple of tip's if it's a CTC120 chassis check solder connections in tuner module, also check coil L104 hooked to pin 7 of flyback for poor solder connections or for open coil. Dan Webster Webster's TV ----- Original Message ----- From: Rob <rrattew9347@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, September 26, 2001 10:28 PM Subject: [TechAssist] Re: RCA TV Model# GPR798P > > If this is the chassis I'm thinking of there is a coil near flyback that > opens in pcb int . (not sure of location #) Also maybe front buttons. If ok > with buttons unplugged take button assy. apart & remove sponge from buttons > maybe causing leakage on switches Rob ----- Original Message ----- > From: "Maxwell Bailes Jr." <bailes4@xxxxxxxxx> > To: "techassit" <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, September 26, 2001 10:58 PM > Subject: [TechAssist] RCA TV Model# GPR798P > > > > > > Subject: [tv-repair] RCA TV Model# GPR798P > > > > > > > > Hello, > > This set is an older one,I have no schmatic on it. It > > will play perfect,then it will lost video and channel > > selection number in the box in the cabinet. It keeps > > sound and has snowy raster. Doesn't seem like a break > > or bad solder joint.Tapping set doesn't bring it back. > > Any help would greatly be appreciated. > > TIA > > Max > > > > > > > > ===== > > Max Bailes > > Bailes Electronics > > Rt.4 Box57-A > > Hurricane,WV. 25526 > > 304-562-7167 > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.