Matt; both of those symptoms can be caused by a bad MSC module, those 130 series chassis`s were infamous for broken solder connections inside the module especially the pins where the plugs attatched, resolder all the "JS" joints. Hope this helps, Larry E. American TV & Electronics Sunny Florida matt sherer wrote: >Unit has pic pulled down 2" from top and will not change channels. Checked >all the PS voltages according to the sticker on the inside of TV and all >checks good. Any help appreciated. > >Gear Guy >Electronic repair >A/V systems design, maintenance and installation >AMX programming >Matt Sherer, CET >1411 Honeysuckle Lane >Champaign, IL 61821 >(217)356-9479 > > > >------------------------------------------ >To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html >------------------------------------------ >***NEW*** Tips Added Instantly!!!*** >Submit Repair Tips here: >http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/