Q101 comes as a kit (160082) that includes; Q101 R102 3.3 ohm R103 47 ohm R106 2.2 ohm Q100 142251 CR105 and CR108 142569 Also check R109 2.7 - 22 watt. Check the B and E connections to Q101 or better yet solder them into the socket when the repair job is complete. I have had 1 failure of Q401, the chopper driver. John. John Mielke Main TV 636 main St. Longmont, Co phone 303 776 6955 fax 303 776 0792 maintv2004@xxxxxxxxxxx ----- Original Message ----- From: "Gary McCartney" <gary@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, June 19, 2004 12:24 PM Subject: [TechAssist] RCA TV CTC131, need part numbers for chopper transistors > This CTC131 was hit by a major power company surge. It belongs to my > buddy or else I'd say to forget it. Anyways, the chopper output Q101 and > chopper shut off Q100 are both shorted. R103 47 Ohm is open as well as > R106 2.2 ohm. > > Does anyone have the RCA part numbers for the transistors, and also > workable subs if any? > > Thanks for any help. > -- > > > > > Gary McCartney > > McCartney Electronics > Guelph Ontario Canada > Est. 1984 > email: gary (at) number63.ca > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/