change c4402 and cr4402 al marquardt ampm@xxxxxxx ----- Original Message ----- From: "Larry E." <videotech@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, January 26, 2002 10:42 AM Subject: [TechAssist] RCA Projection problem > > Model P52731WK, Chassis 169PGB, text on bottom of screen has a severe > upward bow to it, top bows downward very slightly, sides look normal > except when a box is displayed on > the screen then it has the typical pincushion hourglass shape. When a > regular picture is displayed without any text or boxes it`s very > difficult to see any problem, I`m thinking > pincushion circuit (spraying pin board with freeze spray does nothing) > but was told by > another tech it`s probably convergence problem, any body seen this > before? Have not been > able to take any voltages yet as customer couldn`t move unit to give us > model # before we > went out, will get more info Monday, TIA, Larry American TV & Electronics > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.