Jim, I tried to email you privately about this chassis but the mail was returned to me. Do you have a different email address I can mail you or can you rectify my transmission problem? Maybe your ISP won't allow my address for a reason? Gary McCartney McCartney Electronics Guelph Ontario Canada Est. 1984 email: gary (at) number63.ca Jim Bailey wrote: > > Hi Guys > This TV came in sound no picture I have no print on this but I had > unplugged the power cable from the power supply that feeds the convergence > amp board and my luminous came back further test found the first four > transistor bad Q20,Q21,Q22,Q24 and a 2.2 ohm 2watt and a 1 ohm resistor bad. > I also had to change the bleeder assy the set was out of focus. The problem > I have now is that the set is pulled in on the sides, left side about 1/2" > and the right side about 1/8" TV has a good picture and when it changes from > scene to scene it doesn't bloom or seem to have bad regulation problem. Its > like the width needs adjusted Iam not to familiar with this chassis. > I don't have a manual to see if there are any adjustment to make, or > do I > still have another problem some ware. The power supply that is mounted on > the right side of the light box has a pot on there that I tried to turn and > it made the picture expand out for a moment then it returned to being pulled > in I may still have a problem with this board! > Any information or print would be appreciated. > > Jim Bailey > Bailey's TV Sales & Service > Buckhannon, WV 26201 > baileystv@xxxxxxxxxxxx > > ***************************************************************************** > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ -- ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/