Ok, also check C4139, C4108 (47UF @ 50V), CR4122 (200158), T4751, T4301 and the focus block may be bad. Horiz or Vert deflection problems? So, for either; check C4502, CRT, yoke, R4507, resolder E4402, T1, C4403. HV splitter could also be bad. -Clint God Bless Us All Clint Hamilton, Owner http://OrpheusComputing.com sales@xxxxxxxxxxxxxxxxxxxx Tech-Assist Administration http://tech-assist.org techassist@xxxxxxxxxxxxx ----- Original Message ----- From: "Leonard G. Caillouet" <lcaillo@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, October 10, 2001 9:55 AM Subject: [TechAssist] Re: RCA P46721LV PKT169PFA Clint, The set squeals very faintly with no deflection nor HV. Will check these... Thanks, Leon. Leonard G. Caillouet Service Manager Electronics World Gainesville, FL 352-332-5608 352-332-5668 (fax) ----- Original Message ----- From: "TechAssist Admin." <techassist@xxxxxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, October 10, 2001 10:31 AM Subject: [TechAssist] Re: RCA P46721LV PKT169PFA > > Leonard, what are the symptoms when the focus lead IS > attached? Dead, shutdown, pulsing, or...? From what little > I can tell, check R4704, R4713 and the grounds around the > input to the focus block. > -Clint > > God Bless Us All > Clint Hamilton, Owner > http://OrpheusComputing.com > sales@xxxxxxxxxxxxxxxxxxxx > Tech-Assist Administration > http://tech-assist.org > techassist@xxxxxxxxxxxxx > > ----- Original Message ----- > From: "Leonard G. Caillouet" <lcaillo@xxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, October 10, 2001 9:07 AM > Subject: [TechAssist] RCA P46721LV PKT169PFA > > > > This set will only run if the focus lead is disconnected from > the focus > control module. Anyone have a history on this? > > Leon. > > Leonard G. Caillouet > Service Manager > Electronics World > Gainesville, FL > 352-332-5608 > 352-332-5668 (fax) > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.