That's about right. I always replaces the primary caps anyway. al marquardt ampm@xxxxxxx ----- Original Message ----- From: "D Panday" <dpanday@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, November 26, 2002 9:32 PM Subject: [TechAssist] Re: RCA Model#P46732BA.. CTC169PG. " NO POWER" > > > Hi All, > RCA PTV with no power. I found Diode CR4118 Leaking. > Replaced and TV came ON. However, B+ on Standby is 143V and with > TV Power ON (Running) is 142V. > I replaced all the electrolytic Capacitor in The Power Supply > HOT Ground. > .. Can you tell me if my voltage is ok ...OR what are my > possible problem. > TIA. > Panday > > > > > > _________________________________________________________________ > MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*. > http://join.msn.com/?page=features/virus > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/