Have you gone into service mode and checked for errors? Do you have a chipper checker? Gary Pahls wrote: >The Service number for this unit is D52W17BYX1 >When this set came in it would randomly turn itself on an off, ordered new >small signal board, the set runs fine now but the geomety is way off. Can't >get it to fill the screen horizontally, vertical is close. We went through >the set up proceedures that came with the new panel but no results. Tried >swapping all 4 eprom IC's, no results, tried a second board, no results. Can >someone tell me if the part number 264120 is the right small signal panel for >this set, and if so what are we missing. It almost appears that this panel is >for a 4X3 instead of a 16X9 set. We have changed the parameters on the new >board for widescreen. When I switch the aspect ratio from 4X3 to 16X9 I don't >notice any significant change. This is the first one of these I've seen so I >am probably just missing something. > >TIA > >Gary Pahls >Beloit Entertainment Center >bec@xxxxxxxxx >----------------------------------------------------------------------------- >This Email List is accessible to the general public through search engines. >Remove: http://www.tech-assist.org/remove.htm >Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Email Archives: //www.freelists.org/archives/techassist/ > > > > -- ********************** Bill Grabowski Triangle Appliance 3813 Roosevelt Rd Kenosha WI 53142 262-694-6500 262-694-6523 fax bgrabowski@xxxxxxxxx ********************** ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/