Larry, Remove and test R4104 off pin #4 of the regulator, I believe its 1.5 megs.. Bob, Bobs TV Worcester, ma woodman1@xxxxxxxx Main 508-853-1482 Fax 508-853-1480 ----- Original Message ----- From: "Larry E" <videotech@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, September 22, 2004 3:24 PM Subject: [TechAssist] RCA G35772AT CTC187CL DEAD > Hi Guys, this 187CL is stone dead, no click from relay, HOT is good, > have 160 v on collector > in standby, resoldered H- driver transformer and the coil, C4107 is > good, found a bad > C4105 10uf @ 200 replaced it with no change, I need to know if the > voltages are correct > on U4101 as I don`t have the schematic, they are > Pin 1= -40 > 2= -33 > 4= 0 > 5= .9 > 6= .9 > 7= .4 > 8&9 = 0 > 11&12 = 165 thanks in advance, Larry E > Larry Eastman > American TV & Electronics > Crystal River, Fl. 34428 > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/