NO, they are the base voltages,......the emitter voltage is .14 with no signal, and .24 with a signal. LLW LeRoy Westlund Westlund TV & Electronics 97 North Main " I forgot,..to remember,.. Centerfield, UT 84622-0087 to forget " Ph./Fax 435-528-3822 mailto:LLW@xxxxxxxxxx -----Original Message----- From: DAMON BRUNGER <damoneb@xxxxxxxxxxx> To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx> Date: Tuesday, May 31, 2005 7:32 AM Subject: [TechAssist] Re: RCA F35731MB CTC169JS6 - Shuts off when signalsource is connected. >Isn't this the SMPS's emitter voltage? ><Voltage Q4101-Base = standby = -.19 ( Run = -1.4)> >I wonder if it is. > >Damon Brunger >Telrad Electronics >Fort Wayne IN >----- Original Message ----- >From: "LeRoy Westlund" <llw@xxxxxxxxxx> >To: "TechAssist" <techassist@xxxxxxxxxxxxx> >Sent: Monday, May 30, 2005 7:40 PM >Subject: [TechAssist] RCA F35731MB CTC169JS6 - Shuts off when signal source >is connected. > > >> Hi members, >> This set will run all day with raster only. As soon as I hook up a signal >> source (Antenna, or external input), it will shut off after about 10 >> seconds. Picture is beautiful, and all voltages from the power supply read >> normal, for that length of time. >> When it shuts off, I have to unplug the power for at least 5 minutes, >before >> my standby voltages will return. >> >> Parts replaced so far, with OEM part numbers : >> Regulater chopper output. (200165) >> Regulator IC (200419) >> Regulator caps. (2.2 @ 100 195691),(15 @ 63 214756),(470 @ 35 190496),(39 >@ >> 100) >> Horz cap (.48 @ 250 197518), CR4118 (164589), C4703 (47 @ 250). >> B+ cap (470 @ 180 200147). >> Tested luminance buffer Q2906= OK. >> >> Voltage readings: >> B+ = standby = 143.2 (Run = 138.2)(adjusted B+ standby for 140, no help). >> CR4118 = standby = 13.4 ( Run = 12.1) >> Voltage Q4101-Base = standby = -.19 ( Run = -1.4) >> >> If I pull the CRT socket, set will run OK, and not shut-off. >> Works the same on my 27" test jig in the shop, as it does hooked up in the >> home, to the original Yoke / CRT load combination. >> >> Would it be wise to replace the IFT at this stage of the game ? Customer >> does not want to spend more then $200 for this repair. I may need to >refund >> about $100-165, that I already collected. It worked for about 1/2 hour >when >> I first took it back, but, it went out again after customer already paid >me. >> >> Anymore help on this would be appreciated. >> LLW >> >> LeRoy Westlund >> Westlund TV & Electronics >> 97 North Main " I forgot,..to remember,.. >> Centerfield, UT 84622-0087 to forget " >> Ph./Fax 435-528-3822 >> mailto:LLW@xxxxxxxxxx >> >> >> ------------------------------------------------------------------------- - >--- >> This Email List is Public. Remove: http://www.tech-assist.org/remove.htm >> Lost Password: http://www.tech-assist.org and select "Login Problems?". >> Appliance Repair List: >http://www.tech-assist.org/secure/tip/chatjoin.htm#app >> Email Archives: //www.freelists.org/archives/techassist/ >> > > >--------------------------------------------------------------------------- -- >This Email List is Public. Remove: http://www.tech-assist.org/remove.htm >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app >Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/