[TechAssist] Re: (RCA) F35670MBFM1 CTC187CN3 *FIXED* extreme fold over vertical!

  • From: "Jim Bailey" <baileystv@xxxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Tue, 10 Feb 2004 15:55:58 -0500

Thanks Guys for your help!!
Problem was cr4501 (155276) going bad when voltage was applied, I also
changed c4504 220uf/35v
I put back the original vertical IC and it was not damaged

Jim Bailey
Bailey's TV Sales & Service
Buckhannon, WV 26201
baileystv@xxxxxxxxxxxx




-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Jim Bailey
Sent: Tuesday, February 10, 2004 10:07 AM
To: TechAssist
Subject: [TechAssist] (RCA) F35670MBFM1 CTC187CN3 extreme fold over
vertical!


This TV has a bright horizontal line through the middle of the picture with
extreme fold over from the middle to the top part of picture looks like
Venetian blinds and no picture from the middle down to the bottom.
I have replaced the vertical IC with no change in the picture; I have ESR
the capacitors in the vertical circuit and can?t find any bad ones yet,
there is a 12volt line being dragged down to about 7 volts.
I am getting ready to check the pincushion board next but wondered if
anybody has seen this problem before.
Any help would be appreciated!

Jim Bailey
Bailey's TV Sales & Service
Buckhannon, WV 26201
baileystv@xxxxxxxxxxxx




----------------------------------------------------------------------------
-
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/


-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts:

  • » [TechAssist] Re: (RCA) F35670MBFM1 CTC187CN3 *FIXED* extreme fold over vertical!