Why not use several pieces of normal heat shrink? Robert tvservice@xxxxxxxxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "Larry E." <videotech@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, November 14, 2002 4:05 PM Subject: [TechAssist] Re: RCA F35100ST CTC169BG2 need flyback part # 2nd try > > Robert, that is the drawing # on the original and on the fly they sent > me, problem is they don`t include the 2 pieces of tubing with a new > 200418, without the 2 pieces of tubing that are on the original > (and get destroyed when removing the old fly)I have an exposed HV > connection. Thomson should supply the tubing with the fly or have a > part # for the tubing kit, so far I`m getting nothing from them and I can`t > believe I`m the only tech in North America replacing a flyback in a > CTC169BG2 chassis. Thanks for your time,And the info on the Toshiba > Projection unit, I really appreciate it, Larry E > > Larry Eastman > American TV & Electronics > Crystal River, Fl. 34428 > > tvservice wrote: > > > What is the drawing number on flyback > > is it 2G25016-505 if so it uses #200418 > > Robert > > tvservice@xxxxxxxxxxxxxxxxxxx > > H & H Electronics Inc > > > > ----- Original Message ----- > > From: "Larry E." <videotech@xxxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Thursday, November 14, 2002 3:08 PM > > Subject: [TechAssist] RCA F35100ST CTC169BG2 need flyback part # 2nd try > > > > > > > >>Hi guys, I`m having a hard time getting the proper flyback for this tv. > >>My service manual for 169 direct views doesn`t list a part # for the > >>"BG2" it shows it as a family 3 chassis but theres no listing for it > >>in the parts list, my supplier sent a 200418 but it`s the wrong part. > >>The original fly has the anode lead and a focus lead that is approx. > >>6-7 inches long that is soldered to a 3.3 meg resistor and the other end > >>of that resistor is soldered to a red wire coming from the G2/focus > >>block which is NOT mounted to the flyback, it is mounted to the heatsink > >>of the HOT. The in series 3.3 meg resistor and it`s solder connections > >>are then covered with a clear piece of tubing that is then covered with > >>a piece of white heat shrink tubing to isolate the 2 solder connections. > >>Thomson has been researching this for over 10 days and my customer is > >>getting VERY frustrated, without the clear tubing and the white heat > >>shrink tubing (which must come with the right part) I`m stuck, does > >>anyone know the correct part # for this fly? tia, Larry E > >> > >>-- > >>Larry Eastman > >>American TV & Electronics > >>Crystal River, Fl. > >>http://www.tvjunkyard.com > >> > >>------------------------------------------ > >>To REMOVE your email address, click here: > >> http://www.tech-assist.org/unsubb.html > >>To CHANGE your email address, click here: > >> http://www.techassist.net/forms/change.html > >>------------------------------------------ > >>***NEW*** Tips Added Instantly!!!*** > >>Submit Repair Tips here: > >>http://www.tech-assist.org/secure/tip/ > >> > >> > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > To CHANGE your email address, click here: > > http://www.techassist.net/forms/change.html > > ------------------------------------------ > > ***NEW*** Tips Added Instantly!!!*** > > Submit Repair Tips here: > > http://www.tech-assist.org/secure/tip/ > > > > > > > > > -- > Larry Eastman > American TV & Electronics > Crystal River, Fl. > http://www.tvjunkyard.com > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/