TV was given to us.Another "Tech" had it first.First, noticed picture was way too bright.with brightness at minimum the screen still had retrace and illumination.I lowered the G2 to minimum but not low enough. The 200V source to CRT is about +180.This set has a focus/G2 assembly that slides into a slot on rear of fly.Inside has a ceramic plate with the pots on it. Seems OK but maybe this is bad.Acts like I need a bit more range on the G2.Does the fly have more internal G2 circuitry? Trying to decide if problem is bad g2/focus assy, fly or other. Another symptom: When I power it off, the split second before it shuts off the CRT goes bright red. Otherwise pic is perfect. Phil Bader -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: philbad@xxxxxxxxxx ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/