First you can't get a HD picture on composite connection it has to be component pr pb and y. Next these models can't process a progressive scan signal from a receiver. You have to switch the output format of your HD receiver to 1080i. Jason Moutons Electronics ----- Original Message ----- From: "Valley TV" <valleytv@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, February 07, 2006 1:36 PM Subject: [TechAssist] RCA D61W20 HD problem > Hi everyone.. > This one has me a little confused!BIG surprise.. > One of our store accounts called today with a problem with > a RCA D61W20W (ITC222 chassis). When the set is switched > to composite input for HD reception the picture goes out > of sync and 3 side-by-side pictures appear. We have had > problems at this location before with Panasonic sets out > of HD sync but they ALL did it. They use a distribution=20 > system at this location and send the signal to 100 sets > all of which (other RCA's too) are working.=20 > Any thoughts???? > > TIA!!!! > Gary > Valley TV > Drums, PA office > > > --=20 > ___________________________________________________ > Play 100s of games for FREE! http://games.mail.com/ > > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search > engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/