Jonas hold the volume down button in on the set til the "P" goes off that indicates it was left in the manufacturer service position Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc Dallas, TX ----- Original Message ----- From: "jonas miglinas" <miglinasj@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, March 08, 2004 7:15 PM Subject: [TechAssist] RCA D40EW11 ATC221 > Hi all, > I changed the SSB (small signal board) in this unit, I fired up the set and got a good picture with sound. But I see a letter " p " on the bottom left hand side of the picture. No idea what it means. Will shoot off an e-mail to the RCA techs to find out but was hoping if anyone else may have seen this before. > Jonas Miglinas > Miglinas TV > Chicago > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/