How about changing the EPROM? Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "John at Main TV" <maintv2004@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, January 24, 2005 7:11 PM Subject: [TechAssist] RCA CTC203CA has stange color > RCA F32649YX59 > Chassis CTC203CA5 > Manuf. 2001 > This set has washed out color except for the right edge of large objects. > The colors are wrong (a red raster from my generator appears purple, ect) > and the tint control was only a little effect. Tapping on or heating the > chassis has no effect. I swapped the analog comb filter board with no > effect. It is not a purity problem. I found no tips for this in winstips. > I am thinking maybe T chip or color crystal. Has anyone else seen this > problem? John. > John Mielke > Main TV > 636 main St. > Longmont, Co > phone 303 776 6955 > fax 303 776 0792 > maintv2004@xxxxxxxxxxx > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/