I had a CTC175 that was missing some of the menus and it was the EPROM. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Jon Garver" <jongar@xxxxxxxxxxxxx> To: "TechAssist" <techassist@xxxxxxxxxxxxx> Sent: Monday, February 16, 2004 4:31 PM Subject: [TechAssist] RCA CTC203AX No Cable/Air channels > Model F27625 w/ Gemstar and on board tuner. > > Thought this was going to be an easy one. > > Unit came in with broken cable/antenna input connector. > Soldered the connector back in, repaired the broken trace > that it was attached to. Now the set has no video or sound, > just a noiseless raster with the words "unusable signal". > > Checked the I.F. coming out of the tuner and it appears to > be fine. I can't find an "autoprogram" in the menu. By the > way, external audio/video in and OSD works fine. > > I ran Chipper Check on it and it says the main EEPROM is OK. > I pinged the Gemstar and got an error message "U26401 did not > respond on the standby bus". Hitting the error codes button > produced this message, "Code 16 Run I2C clock or data is clamped > at logic 0. > > So, along with the CC info, I can't find anything on the menu > to autoprogram the channels. According to the owner's manual, > that function should be available right after selecting the > language option. Instead, the setting up the Gemstar option > is there. > > Am I missing something here or is it a EEPROM, Gemstar, or > T-chip problem? I have a partial schematic but it doesn't > cover any of these circuits. > > Also the customer says they received it second hand that way > and that the previous owners had used the aux. inputs. > > Thanks, > > Jon Garver > Heritage Television Service > 204 Heritage Rd. > Monticello, Indiana U.S.A. > 574-583-9681 Voice & FAX > jongar@xxxxxxxxxxxxx or > htv1@xxxxxxxxx (for file u.l.) > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/