[TechAssist] Re: RCA CTC203 tuning?
- From: "Damon" <DAMON101@xxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 6 Feb 2002 22:37:11 -0500
If that doesn't work, you'll need to make sure that a horiz pulse and AFT
control voltage is available to the micro during autoprogram. Never had this
myself, but there's always a first time.
Damon Brunger
damon101@xxxxxxxxxxxxxx
Telrad Electronic Services
Ft Wayne, IN 46815
----- Original Message -----
From: "larry" <schntv@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, February 06, 2002 4:47 PM
Subject: [TechAssist] Re: RCA CTC203 tuning?
>
> yes, this should hold channels.
> It wont auto search and find cable.
> I ordered a new eprom.
> will let you all know if it helps.
> Thank you,
> Larry
>
>
> Damon wrote:
> >
> > Larry,
> > I'm not 100% sure if the CTC 203 will hold its channels if unplugged
> > overnight. Try autoprogramming again and see if it stores the channels,
then
> > leave it connected overnight and check it again. If it loses channels,
then
> > replace the eeprom, ok?
> >
> > Damon Brunger
> > damon101@xxxxxxxxxxxxxx
> > Telrad Electronic Services
> > Ft Wayne, IN 46815
> > ----- Original Message -----
> > From: "larry" <schntv@xxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Tuesday, February 05, 2002 10:31 AM
> > Subject: [TechAssist] RCA CTC203 tuning?
> >
> > >
> > > the set will not program cable channels.
> > > we initialized the eprom and it programmed ok, now unplugged
> > > all night and it is back to no cable channels.
> > > I this a common problem, should I replace the eprom?
> > > Help please
> > > Larry
> > >
> > > --
> > > Schneider TV & Electronic Inc.
> > > 5415 N. Wooster ave.
> > > Dover, Ohio 44622 www.geocities.com/schntv2000/
> > > 330-343-0768 FCC. first class & Extra class K8WLY
> > > ------------------------------------------
> > > Make your TechAssist database better!
> > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > > ------------------------------------------
> > > To UNSUBSCRIBE your email address, click here:
> > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > Or send a BLANK email with unsubscribe in the
> > > SUBJECT field to the address above.
> > >
> > >
> > >
> >
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
>
> --
> Schneider TV & Electronic Inc.
> 5415 N. Wooster ave.
> Dover, Ohio 44622 www.geocities.com/schntv2000/
> 330-343-0768 FCC. first class & Extra class K8WLY
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
