[TechAssist] Re: RCA CTC187, no cable tuning above ch 50

  • From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Fri, 14 Dec 2001 17:09:39 -0500

Yes you can, then get the data from the old eeprom so you can enter it into
the new eeprom assuming it needs to be replaced and assuming the data is not
corrupt.
Jim Myers
jr.myers@xxxxxxxxxxx
----- Original Message -----
From: "Bill McFarland" <billmcfarland@xxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, December 14, 2001 3:41 PM
Subject: [TechAssist] Re: RCA CTC187, no cable tuning above ch 50


>
> I think a see a new little secret here?
>
> You can do this "hot" swap the EEprom?
>
> Explain this further please?
>
> Bill McFarland
> DMC Electronics
>
> ----- Original Message -----
> From: Rochester Electronics <pasthecash@xxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Friday, December 14, 2001 1:25 PM
> Subject: [TechAssist] Re: RCA CTC187, no cable tuning above ch 50
>
>
> >
> > After replacing this ic i believe you will have to realign
> > the paramiters in e-prom. Or you can install a socket
> > remove your old e-prom and sub with one to power up set
> > then while power is on swap out the eprom.
> > Hope this helps,
> >
> > Mike
> >
> >
> > --- tvdoctors@xxxxxxxxxxxxx wrote:
> > > Try the U7301, right in the middle of the tuner. It's an
> > > inline IC.
> > >
> > >
> > > > ** Original Subject: RE: [TechAssist] RCA CTC187, no
> > > cable tuning above ch 50
> > > > ** Original Sender: "Jim Myers" <jr.myers@xxxxxxxxxxx>
> > > > ** Original Date: Fri, 14 Dec 2001 13:09:34 -0500 (EST)
> > >
> > > > ** Original Message follows...
> > >
> > > >
> > > > I've seen this posted a few times but now can't find
> > > it, which IC? or what else causes this problem?
> > > > Thanks
> > > > Jim Myers
> > > > jr.myers@xxxxxxxxxxx
> > > >
> > > > =================================
> > > > Help make your TechAssist database better!
> > > > Submit your fixes here:
> > > http://circuitwork.com/techassist/tip/#tips
> > > > =================================
> > > > To UNSUBSCRIBE your email address, click here:
> > > >
> > >
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > >
> > >
> > >
> > > >** --------- End Original Message ----------- **
> > >
> > > >
> > >
> > > TV Doctors    108 W. Main St. Monroe,Wa. 98272
> > > 360-794-6469
> > >
> > > =================================
> > > Help make your TechAssist database better!
> > > Submit your fixes here:
> > > http://circuitwork.com/techassist/tip/#tips
> > > =================================
> > > To UNSUBSCRIBE your email address, click here:
> > >
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > >
> >
> >
> > =====
> > Mike Rochester Electronics716-663-6870www.RochesterElectronicsRepair.com
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Check out Yahoo! Shopping and Yahoo! Auctions for all of
> > your unique holiday gifts! Buy at http://shopping.yahoo.com
> > or bid at http://auctions.yahoo.com
> > =================================
> > Help make your TechAssist database better!
> > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > =================================
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> >
>
> =================================
> Help make your TechAssist database better!
> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> =================================
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>

=================================
Help make your TechAssist database better!  
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe

Other related posts:

  1. Home
  2. techassist
  3. Archive
  4. 12-2001