[TechAssist] Re: RCA CTC175A chassis, F20601SE, bad connection in tuner?

  • From: "Bob@Bobs tv" <woodman1@xxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Fri, 5 Mar 2004 15:19:14 -0500

Kevin,
        I have had a few.. that the foil was cracked at the pins to the
T-Chip at the circle where the pin goes thru ----O.. Very hard to see.. What
I have done is scrape the paint back and solder the pins to foil like 1/16"
Bob,

Bobs TV   Worcester, ma

woodman1@xxxxxxxx

Main  508-853-1482
Fax    508-853-1480
----- Original Message ----- 
From: "Kevin" <kevintv@xxxxxxx>
To: "TECH-ASSIST" <techassist@xxxxxxxxxxxxx>
Sent: Friday, March 05, 2004 2:36 PM
Subject: [TechAssist] RCA CTC175A chassis, F20601SE, bad connection in
tuner?


> This set is driving me crazy.  When I flex the board, or push on certain
> areas around the tuner and T-chip, the picture goes from perfect to very
> grainy.  The bad connection appears to "move" as pushing on the same
> spot does not always fix or create the problem.  I tried flexing the
> board in the dark and looking for a flash of light to indicate where the
> bad connection is.  I also went over the board with a brush with no
> success.  Except for soldering the whole board including surface mount
> components, what else can I do?  TIA
>
> Kevin Wilks
> Kevin's TV & Video Repair
> Penticton BC Canada
> kevintv@xxxxxxx
>
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts:

  1. Home
  2. techassist
  3. Archive
  4. 03-2004