I hate to be like this, but it sounds like the micro. Wayne Vanaman Omega Electronics 6904 W Fairfield Dr Pensacola, Fl. 32506-3310 Wayne@xxxxxxxxxxxxxxxxxxxxx WWW.PensacolaTVRepair.Com 850-456-5995 voice 850-458-6369 fax Bill Grabowski wrote: > Yes I have pulses on pin 23...................... > > Bill Grabowski > Triangle Appliance > Kenosha, WI 53142 > > Wayne Vanaman wrote: > > >>Bill: >>My head is pretty thick. >>Are you saying you have pulses the micro pin 23, or that you do not have >>pulses on the micro pin 23 but you do have pulses on transistor q4402? >> >>Wayne Vanaman >>Omega Electronics >>6904 W Fairfield Dr >>Pensacola, Fl. 32506-3310 >> >>Wayne@xxxxxxxxxxxxxxxxxxxxx >>WWW.PensacolaTVRepair.Com >> >>850-456-5995 voice >>850-458-6369 fax >> >> >>Bill Grabowski wrote: >> >> >>>Yes I have 5volts PtoP and collector and base of Q4402 on the money!! >>> >>>Bill Grabowski >>>Triangle Appliance >>>Kenosha, WI 53142 >>> >>>Wayne Vanaman wrote: >>> >>> >>> >>> >>>>Bill: >>>> >>>>Any RCA (ok, most) with an autoprogram problem: Check H Sync going into >>>>the micro. No H sync, no memory. Set defaults to "air", no channels >>>>stored in memory, and channels can be tuned manually. Set can be put in >>>>"cable", and channels can be tuned manually. >>>> >>>>Most brands of TVs autoprogram looking for that 3.58 burst. Most brands >>>>store the "jammed" channels, because they have a 3.58 burst. >>>> >>>>Not RCA. RCA figures that if there is no H Sync you don't want to watch >>>>it anyway, so who cares if it is in color. >>>> >>>>H Sync on micro U3101p 23 about 5V. It comes through a convoluted path. >>>>The last active semi before the micro is SMD Q4402 pn 215495, a high >>>>failure part number. 5.4V pulses on the emitter, 9vdc on the collector >>>>1.09vdc on the base. I guess about 5V pulses on the base, the schematic >>>>doesn't say, the show 11V pulses then a 4700/5100 ohm voltage divider to >>>>ground. >>>> >>>>Let us know if you have H Sync on the micro. >>>> >>>>Wayne Vanaman >>>>Omega Electronics >>>>6904 W Fairfield Dr >>>>Pensacola, Fl. 32506-3310 >>>> >>>>Wayne@xxxxxxxxxxxxxxxxxxxxx >>>>WWW.PensacolaTVRepair.Com >>>> >>>>850-456-5995 voice >>>>850-458-6369 fax >>>> >>>> >>>>Bill Grabowski wrote: >>>> >>>> >>>> >>>> >>>>>What I thought to be an easy job turned into a dog. This set will not >>>>>lock on channels quick enough to allow auto-programming. I have changed >>>>>the following and re-adjust the aft tank coil after each for the >>>>>quickest lock on station. I replaced the IC1001,comb filter,tuner,AFT >>>>>tank coil. I have all the necessary voltages at the tuner. Anyone have >>>>>any ideas?? I'd appreciate it,Thanks!! >>>>> >>>>> Bill G. >>>> >>>>----------------------------------------------------------------------------- >>>>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm >>>>Set Vacation >>>>mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >>>>Lost Password: http://www.tech-assist.org and select "Login Problems?". >>>>Email Archives: //www.freelists.org/archives/techassist/ >>>> >>> >>> >>----------------------------------------------------------------------------- >>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm >>Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >>Lost Password: http://www.tech-assist.org and select "Login Problems?". >>Email Archives: //www.freelists.org/archives/techassist/ >> > > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/