[TechAssist] Re: RCA CTC169
- From: "Moutons Electronics L.L.C." <moutons@xxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 30 Jun 2005 09:17:10 -0500
There is a video detector tank near the aft tank that can cause the same
problem. It adjust much like the aft where you adjust for the quickest
response and on occasion you may have to change it.
Jason
Moutons Electronics
----- Original Message -----
From: "Bill Grabowski" <bgrabowski@xxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, June 29, 2005 7:18 PM
Subject: [TechAssist] Re: RCA CTC169
> Yes I have pulses on pin 23......................
>
> Bill Grabowski
> Triangle Appliance
> Kenosha, WI 53142
>
> Wayne Vanaman wrote:
>
>> Bill:
>> My head is pretty thick.
>> Are you saying you have pulses the micro pin 23, or that you do not have
>> pulses on the micro pin 23 but you do have pulses on transistor q4402?
>>
>> Wayne Vanaman
>> Omega Electronics
>> 6904 W Fairfield Dr
>> Pensacola, Fl. 32506-3310
>>
>> Wayne@xxxxxxxxxxxxxxxxxxxxx
>> WWW.PensacolaTVRepair.Com
>>
>> 850-456-5995 voice
>> 850-458-6369 fax
>>
>>
>> Bill Grabowski wrote:
>>
>>>Yes I have 5volts PtoP and collector and base of Q4402 on the money!!
>>>
>>>Bill Grabowski
>>>Triangle Appliance
>>>Kenosha, WI 53142
>>>
>>>Wayne Vanaman wrote:
>>>
>>>
>>>
>>>>Bill:
>>>>
>>>>Any RCA (ok, most) with an autoprogram problem: Check H Sync going into
>>>>the micro. No H sync, no memory. Set defaults to "air", no channels
>>>>stored in memory, and channels can be tuned manually. Set can be put in
>>>>"cable", and channels can be tuned manually.
>>>>
>>>>Most brands of TVs autoprogram looking for that 3.58 burst. Most brands
>>>>store the "jammed" channels, because they have a 3.58 burst.
>>>>
>>>>Not RCA. RCA figures that if there is no H Sync you don't want to watch
>>>>it anyway, so who cares if it is in color.
>>>>
>>>>H Sync on micro U3101p 23 about 5V. It comes through a convoluted path.
>>>> The last active semi before the micro is SMD Q4402 pn 215495, a high
>>>>failure part number. 5.4V pulses on the emitter, 9vdc on the collector
>>>>1.09vdc on the base. I guess about 5V pulses on the base, the schematic
>>>>doesn't say, the show 11V pulses then a 4700/5100 ohm voltage divider to
>>>>ground.
>>>>
>>>>Let us know if you have H Sync on the micro.
>>>>
>>>>Wayne Vanaman
>>>>Omega Electronics
>>>>6904 W Fairfield Dr
>>>>Pensacola, Fl. 32506-3310
>>>>
>>>>Wayne@xxxxxxxxxxxxxxxxxxxxx
>>>>WWW.PensacolaTVRepair.Com
>>>>
>>>>850-456-5995 voice
>>>>850-458-6369 fax
>>>>
>>>>
>>>>Bill Grabowski wrote:
>>>>
>>>>
>>>>
>>>>>What I thought to be an easy job turned into a dog. This set will not
>>>>>lock on channels quick enough to allow auto-programming. I have changed
>>>>>the following and re-adjust the aft tank coil after each for the
>>>>>quickest lock on station. I replaced the IC1001,comb filter,tuner,AFT
>>>>>tank coil. I have all the necessary voltages at the tuner. Anyone have
>>>>>any ideas?? I'd appreciate it,Thanks!!
>>>>>
>>>>> Bill G.
>>>>
>>>>-----------------------------------------------------------------------------
>>>>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>>>>Set Vacation
>>>>mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
>>>>Lost Password: http://www.tech-assist.org and select "Login Problems?".
>>>>Email Archives: //www.freelists.org/archives/techassist/
>>>>
>>>
>>>
>> -----------------------------------------------------------------------------
>> This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>> Set Vacation
>> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
>> Lost Password: http://www.tech-assist.org and select "Login Problems?".
>> Email Archives: //www.freelists.org/archives/techassist/
>>
>
> --
> *****************************
> Bill Grabowski
> Triangle Appliance
> Kenosha,Wi 53142
> 262-694-6500
> 262-694-6523 fax
> bgrabowski@xxxxxxxxx
> *****************************
> -----------------------------------------------------------------------------
> This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
> Set Vacation
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> Lost Password: http://www.tech-assist.org and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
