[TechAssist] Re: RCA ATC113CA1
- From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 16 Sep 2004 20:55:18 -0400
Brock,
I have one in the shop that is doing the same thing.
It is a ITC008..but not sure how close it is to yours..
Mine has a vented cap, front left of board(looking from rear).
Odd thing was it ESR's fine..but after I replaced it, the set ran for two hours
w/o shutting down.
It was bulge at the top pretty good.
Jeff
--
Intrepid Video TV/VCR Repair
263 S Front St, Steelton PA 17113
717-939-7708; (F) 717-564-4952
www.intrepid-video.com www.tech-repair.net
----- Original Message -----
From: "markbrock" <markbrock@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, September 15, 2004 6:47 PM
Subject: [TechAssist] RCA ATC113CA1
F32650 chassis ATC113CA1 works most of the time, but once in a while
the picture will fade out and be black, osd and sound stays up and ok,
I've resoldered the coil at h.o.t. still the same, any ideas ?
thanks
brock
Brock Electronics
R.R.4 box 237
5208 cr.3385
Independence Ks. 67301
620-331-0235
fax 331-7191
markbrock@xxxxxxxxxxxxx
Zenith*Philips*Peavey*Fender*Crate
we work on all brands,makes,models
of anything that plugs in the wall
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
