[TechAssist] Re: Question on Pica Fuses
- From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 18 Feb 2004 23:48:00 -0500
Al,
Tech Assist archives has your answer..from Walter:
I know how to read the Hitachi "protectors".
I.E. marked 7000= m.a.=7k=7amps.
3000ma =3k= 3 amps. ETC.
Can these Protectors be safely replaced with a
"pica fuse"?
If so, should it be regular , fast blow, or slow
blow?
TIA
Walter
Jeff Dougherty
Intrepid Video TV/VCR
263 S Front St
Steelton PA 17113
fax...717-564-4952
www.intrepid-video.com www.tech-repair.net
----- Original Message -----
From: "Al Gutz" <alg@xxxxxxxxxxx>
To: "tech assist" <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, February 18, 2004 11:03 PM
Subject: [TechAssist] Question on Pica Fuses
Someone sent a listing of these fuses and I saved it, Just cannot
remember where I saved it.
I have a fuse with # 7000 and silver band. Is this a 7 amp.
Used in a Zenith (hitachi) ptv. When I replace a 1 ohm resistor the
power supplies all come on.
Zenith lists no spare parts in the manual, only new board. Replace a
board for a bad fuse??
Al G
Al's TV-Electronics
Pembroke Ont.
Canada
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
