[TechAssist] Quasar TV-VCR again
- From: pwblakeman@xxxxxxxx
- To: techassist@xxxxxxxxxxxxx
- Date: Tue, 8 Jan 2002 22:35:12 -0600
Ken thanks for reply. I need a little more info on timing. There are two
holes in the top of the gear with the cams. I assume these are the timing
marks. I can't find anything to align them with. I looked carefully for
holes in the chassis but could not find any. There is a hole on the gear
on the under side with a hole. I aligned
it with a hole in the chassis and reassembled it but it still would not
take the tape. I haven't worked on many
VCR's so I am not to familiar with them.
I would appreciate any further info.
Thanks for other replies too.
TIA,
Peter Blakeman
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
------------------------------------------
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
