We have a TSC in Lake Wales, just about 15 min south. I did not see any on their web site last night. That seems better than the smaller tops from Harbor freight. Phil Old Damon wrote: > Are you by yourself? If not, my boss found a 36" hydraulic cart, that > amazingly can handle the heaviest oak cabinet projo you could think of. > Downside to that heavy cabinet scenario is it took 2 guys to tilt it on one > side, one guy to balance the load while the other moved the cart underneath > it. The table is about 6-8 inches off the ground, but all carts will have > that. It cost him $150.00 at the local TSC (Tractor Supply) Store. > > Can you believe it? You have any TSC's down there? Or any store that seems > to deal with part farm/part auto/part lumber/part doodad type of stuff. We > have a D&B Electronics/Tools and a "Something" Freight store that deals > with >>overstock<< surplus. I think that's the key to the >type< of store to > look for. > > Any questions, just reply and I'll try to be more concise. > > Damon Brunger > Telrad Electronic Services > Ft Wayne, IN 46815 > > ----- Original Message ----- > From: "Phil Bader" <tjanphyl@xxxxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, February 27, 2004 4:44 PM > Subject: [TechAssist] Projo repairs on the floor. alternatives? > > > Without opening a can of worms here , ;-) > > I remember a LOT of posts about those lift carts > > I have an arthritic back and working down on the floor on these projos > > hurts. Elbow on the floor supporting me sideways as i solder and hold > > things up at the same time... > > . > > Is there a general consesis as to the best method to elevate a PTV up a > > few feet and be sturdy, stable and with the lifting device out of the > > way (no braces,etc in front of the work area). > > Not necessarily to move it about, just hike it up where I can sit and > > solder. > > I'm 48 going on 88. > > Phil Bader > > > > -- > > > > Philip Bader > > Jan Phyl TV Inc. (estab. 1976) > > 3420 Recker Hwy. Winter Haven, Fl. 33880 > > Fax (863) 299-8821 > > email: tjanphyl@xxxxxxxxxxxxxxx > > > > > > > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: tjanphyl@xxxxxxxxxxxxxxx ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/