[TechAssist] Re: ProScan with no Vertical Oscillation

  • From: "Shoreline Electronics" <jstielau@xxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Tue, 28 May 2002 19:40:38 -0400

Yep....a model & chassis is needed....although it's prob. a CTC169

Do you get full scan then it collapses?

Or is it collapsed full time.


Jeff Stielau
Shoreline Electronics Repair
125 Beech Tree Lane
Westbrook, CT 06498
860-399-1861
860-664-3535 (fax)
jstielau@xxxxxxxx
----- Original Message -----
From: <AlHelmetag@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, May 28, 2002 5:08 PM
Subject: [TechAssist] ProScan with no Vertical Oscillation


> Pix collapses into 1/2 wide horizontal band.  Not familiar with the layout
> and do not have a schematic on this one.  The set is 10 years old so many
of
> the caps are registering good but should be compared.  The vertical
circuitry
> is a little different on this set.
> Any help much appreciated from the ProScan experts.
> Alex
> Alhelmetag@xxxxxxx
>
>
> ------------------------------------------
> To REMOVE your email address, click here:
>   http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
>   http://www.tech-assist.org/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
>
>


------------------------------------------
To REMOVE your email address, click here:
  http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
  http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here: 
http://www.tech-assist.org/secure/tip/

Other related posts: