Posting this a 2nd time, maybe somebody has experienced this problem. > > Has anyone had any experience with intermittant shutdown after installing a > new Large Signal Board? > > This is a field service call which was originally dead, no HV/sweep, no > indication of power at the power led. > > After installation the new board operated fine, on a second call the B+ was > adjusted to 128V from 130.2 Volts, the Tv ran fine with each visit; the > customer stated that if she turns off TV and comes back after 30 minutes she > cannot get it to turn on. I ran it 30 mins, turned it off, and it still > comes on without a hitch. Not sure why this is happening. Hopefully somebody > has some info about this unit not turning on after being turned off for some > time. > > TIA > > Damon Brunger > damon101@xxxxxxxxxxxxxx > Telrad Electronic Services > Ft Wayne, IN 46815 > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/