Finally back to work after a real bad flu got to me and kept be home for a little while.I have a new pc coming in next week with a large hd and will be dnloading alot of the philips prints.I have the above model that came in with retrace lines and will shutdn in about 5sec.I found the video chip tda 6108jf on the crt bd shorted and also R3840.Don't have the manual but I used a 10 ohm for r3840.I replaced both and powered set up.Same thing.I checked for 200v at the crt bd and there is only 5v.Missing the 200v source.I would like for someone with the manual to please tell me what part or parts on the main bd supply the 200v.I have in my notes to check R3660 and R3661 but both are ok.Thanks for all your help with this problem. Mando Birdie's TV & Electronics Casa GRande, AZ PS, Is 10 ohm ok for R3840? ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/