Wilf, Thank you for the tip. I just checked the horiz drive transformer (although it did have B+ on both sides when I checked that) and sure enough it is fine. As I mentioned this set was hit with lightning - no tellin what else is wrong until I apply a test signal to power up the HV (tomorrow). A print would be nice. If this was an Hitachi it would be a free download! (free tech support too). Thanks again, Bil ----- Original Message ----- From: "W. Blakey" <wblakey@xxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, August 23, 2001 8:14 PM Subject: [TechAssist] Re: Philips TV-VCR CCU091 No H Dirve > > How about checking the horizontal driver transformer as they are notorious > for having open primaries. > Wilf Blakey > Blakey TV > wblakey@xxxxxxxxxxxxxxxx > > -----Original Message----- > From: Bil Green <tv.vcrrepair@xxxxxxxxxxx> > To: .Techassist <techassist@xxxxxxxxxxxxx> > Date: August 23, 2001 9:31 PM > Subject: [TechAssist] Philips TV-VCR CCU091 No H Dirve > > > > > >Philips 9" TV-VCR > >Model CCU091AT01 > >No signal at base of horiz driver > > > >VCR works (audio o.k.) > >HOT has B+ > >Lightning hit > > > >Need location of horiz/ vert IC (or jungle chip) > >Voltages to check or schematic > > > >Thanks, > > > >Bil > > > >Help make your TechAssist online repair tips > >database better! Submit your fixes here: > >http://www.circuitwork.com/techassist/tip/#tips > >To unsubscribe write to: > >techassist-request@xxxxxxxxxxxxx > >with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.