Mando, Force32 shows that to be a valid sub. Bob Waterman, CET® #RI-28 Master Technician License #9109 Service Manager / Parts Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxx geminitv@xxxxxxx www.geminicomputertvsecurityalarms.com ----- Original Message ----- From: "armando guerra" <birdie@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, March 26, 2004 11:32 AM Subject: [TechAssist] Philips Projo Model 9P5544/PTV840 chasis\Need part ID > I ordered the eeprom for this set part # 932215583682 about 2weeks ago > and it came in this morning.The one that I received is a different # as > follows:932215593682.If you notice,my # has an 83 and the replacement > has a 93.Would this be a sub.or did they just made a mistake and send me > the wrong one.Don't want to install until I confirm it. > Thanks for your help. > > PS This set had very bad convergence.I replaced the convergence ic's > and I can now get into convergence mode and align the colors but at the > top of the screen,the lines are not straight.They bend.When viewing some > letters at the top,for ex.an I,it is not straight.other than that,it has > a great picture.I was told by another tech that the eeprom was > corrupted. > Can someone give me their opinions on this problem. > Mando > Birdie's TV & Electronics > Casa Grande, AZ > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/