[TechAssist] Re: Philips Model 43PP9202/17
- From: "Larry Poffen" <lpoffen@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 30 Sep 2005 09:32:43 -0500
Thanks for the response. I don`t have a H/D generator. It is N/G with a
convention aux input PIP though. Did you ever get it fixed? Yesterday I
had an error code 17 again, but it can be reset. This is very
frustrating.(I guess I am getting too old for these new sets) I have worked
on TV`s for 50 years, but this new stuff is about to make me retire (again)
Larrys TV & Computer Service
Broken Arrow OK 74011
phone 918-455-1041
Fax 918-451-4485
e-mail lpoffen@xxxxxxx
----- Original Message -----
From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, September 30, 2005 6:03 AM
Subject: [TechAssist] Re: Philips Model 43PP9202/17
>I have the exact model that had the same problem. I replaced the
>convergence
> ICs and ended up with the same color symptoms you describe except it was
> okay with an HD input. Check to see if yours is okay with HD signal.
>
> Bob Waterman, CET® #RI-28
> Master Technician License #9109
> Service Manager / Parts Manager
> Gemini Computer, TV, & Security Alarms
> (508)695-7302
> (508)695-7769 FAX
> geminitv@xxxxxxxxxxx
>
>
> ----- Original Message -----
> From: "Larry Poffen" <lpoffen@xxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, September 29, 2005 10:28 AM
> Subject: [TechAssist] Philips Model 43PP9202/17
>
>
> I need some advise from a Philips expert on this set. It came in with
> convergence problems, I replaced 7044 & 7045 (STK392-120) with
> STK392-150`s
> & also repl 3159 & 3160 resistors that were open. I set up convergence &
> that is OK , but now have color shift problems In the SAM mode I got an
> error code 16 & 17. The error 17 would reset but come back, but the error
> 16
> would not reset. I replaced the CBA 3135 137 22971 PIP Panel assy for the
> error code 16 (PIP/DW Tuner (ETA50) I2C failure. This did not fix the
> color
> shift problem, but I no longer get the error code 17 only the 16 error.
> The
> error code 17 says PIP IC M65669SP I2C failure or Double Window IC SAB9081
> I2C failure. I am lost on where to go from here. I have posted this last
> week before I got the replacement panel, but am at a loose of what to do
> now. Any info on this problem appreciated. The color shift makes the
> faces
> purple, & all colors wrong, but all colors are there. Help!!! Larry
>
> Larrys TV & Computer Service
> Broken Arrow OK 74011
> phone 918-455-1041
> Fax 918-451-4485
> e-mail lpoffen@xxxxxxx
>
>
> ----------------------------------------------------------------------------
> -
> This Email List is accessible to the general public through search
> engines.
> Remove: http://www.tech-assist.org/remove.htm
> Set Vacation
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> Lost Password: http://www.tech-assist.org and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
>
>
> -----------------------------------------------------------------------------
> This Email List is accessible to the general public through search
> engines. Remove: http://www.tech-assist.org/remove.htm
> Set Vacation
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> Lost Password: http://www.tech-assist.org and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
This Email List is accessible to the general public through search engines.
Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
