You probably have a shorted vertical IC TDA-9302H and diode D409 .Also,check R445 and R420.They are probably open. Mando Birdie's TV & Electronics Casa Grande, AZ Philip Bader wrote: > Still fighting this one.Became a "shop set". Display was totally > black,with HV.and sound. > Turned up G2 on fly to illuminate screen and it did,with the usual > expected white screen and retrace lines from overdrive. But I still at > least see a very faded video signal. I checked the entire CRT board > components,all seem OK, no open resistors or shorted transistors.The > three 2 watt 18K resistors on CRT board feeding the outputs, > (#3314,3324,3334) all have about +194.00V on source sides and about > +193.00V on other sides.The screen control works. I have a full > screen,sound,tuner operation. too faint to see if there is OSD. > At this point I simply want to solve this.It's getting personal ;-) > Wondering if that jungle chip(TDA8373C) is the cause. > Phil Bader > -- > Philip Bader > Jan Phyl TV Inc. (estab. 1976) > 3420 Recker Hwy. Winter Haven, Fl. 33880 > Fax (863) 299-8821 > email: tjanphyl@xxxxxxxxxxxxxxx > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html