[TechAssist] Re: Philips M8
- From: "mark brock" <brock@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sun, 27 Jan 2002 18:49:52 -0800
This is such a mess and this customer bought this set less than 30 days ago,
I'm going to replace the etire pc board and hope for the best,
brock
-----Original Message-----
From: Dennis Viereck <wa6ati@xxxxxxxxxxxxxx>
To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx>
Date: Sunday, January 27, 2002 8:53 AM
Subject: [TechAssist] Re: Philips M8
>
>Were you able to get the option bytes setting from Phillips? I fought with
them
>over a month ago and finally had them to agree to send me the Option Bytes
>codes and the Microprocessor to model list.
>
>They wanted me to call them each time we received a microprocessor that
caused
>the set to lost features. You probably know how much fun it is to call
>Phillips.
>
>You will also need the special programming remote to set the Option Bytes.
>
>If you do not have the Option Bytes I can E-mail it to you.
>
>Dennis Viereck
>
>kwtv wrote:
>
>> no question about it i have shanged at least 30 of these micro processors
>> for the same reason especially if they are toshiba made tmp. Ken
>> ----- Original Message -----
>> From: "al m" <ampm@xxxxxxx>
>> To: <techassist@xxxxxxxxxxxxx>
>> Sent: Friday, January 25, 2002 8:06 AM
>> Subject: [TechAssist] Re: Philips M8
>>
>> >
>> > long time ago when they came out with the L1/4 chassis when the micro
>> heated
>> > up it put on the screen some sort of hiroglifics(don't laugh at the
>> > spelling) spray the micro with freeze spray and see if it goes away
>> > al marquardt
>> > ampm@xxxxxxx
>> >
>> >
>> > ----- Original Message -----
>> > From: "mark brock" <brock@xxxxxxx>
>> > To: <techassist@xxxxxxxxxxxxx>
>> > Sent: Friday, January 25, 2002 8:51 AM
>> > Subject: [TechAssist] Philips M8
>> >
>> >
>> > >
>> > > model MS3650C Chassis 36M8007603, can't see the problem but
customer
>> > says
>> > > will have odd letters scroll across the screen from left to right at
>> > bottom
>> > > single line and when this happens there is no function that will
work,
>> > She
>> > > has to unplug it to reset it. like its in a program mode or
something,
>> > I
>> > > showed her closed caption, she new about it and thats not it.
>> anyway
>> > > was a Christmas present so brand new, very large, and I've no clue
>> what
>> > > is up, any one seen this or have an idea before her 90 mfg.. is up ?
>> > > thanks in advance
>> > > brock
>> > > Brock Electronics
>> > > R.R.4 box 237
>> > > Independence Ks. 67301
>> > > 316-331-0235
>> > > fax 331-7191
>> > > brock@xxxxxxx
>> > > mailto:brock@xxxxxxx
>> > >
>> > >
>> > > ------------------------------------------
>> > > Make your TechAssist database better!
>> > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>> > > ------------------------------------------
>> > > To UNSUBSCRIBE your email address, click here:
>> > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>> > > Or send a BLANK email with unsubscribe in the
>> > > SUBJECT field to the address above.
>> > >
>> > >
>> > >
>> >
>> >
>> > ------------------------------------------
>> > Make your TechAssist database better!
>> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>> > ------------------------------------------
>> > To UNSUBSCRIBE your email address, click here:
>> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>> > Or send a BLANK email with unsubscribe in the
>> > SUBJECT field to the address above.
>> >
>>
>> ------------------------------------------
>> Make your TechAssist database better!
>> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>> ------------------------------------------
>> To UNSUBSCRIBE your email address, click here:
>> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>> Or send a BLANK email with unsubscribe in the
>> SUBJECT field to the address above.
>
>------------------------------------------
>Make your TechAssist database better!
>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>------------------------------------------
>To UNSUBSCRIBE your email address, click here:
>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>Or send a BLANK email with unsubscribe in the
>SUBJECT field to the address above.
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
